Ni najdenih elementov.
CM2000-4 UHF RFID Module (4-Port)
Based on Impinj Indy R2000 Chip, 77.2 x 51.0 x 8.9 mm
Chainway CM2000-4 is a 4-port UHF RFID reader module that can be used in fixed UHF RFID readers. This module with superior UHF RFID performance boasts embedded Impinj R2000 RFID chip to enable greater than 10m read range. With high stability, it is small in size, low in power consumption, resistant to electromagnetic interference and good at heat dispersion. CM2000-4 appeals to warehousing, logistics, apparel, production lines and such.
Lastnosti
Strong Stability
Heat Dispersion
Indy R2000 Chip
Low Power Consumption
Funkcije
UHF RFID
SPECIFIKACIJE
Physical
- Dimensions: 77.2mm x 51.0mm x 8.9mm
- Weight: 52.0g/1.83oz
- Connector Interface: 15 PIN W-TO-B Connector
- Input Voltage: DC 3.5-5.25V
Wireless
- Host Communication Interface: UART 3.3V TTL Level Baud Rate: 115200bps
Scanning
- Reading Rate: Up to 900 tags/s
- Reading Range: >10m ( with 4dBic antenna )
RFID
- Power Consumption In Rf Output Mode: 5.3W@30dBm
- Power Consumption In Standby Mode（En High Ttl Level）: 0.175W
- Power Consumption In Power Down Mode（En Low Ttl Level）: 30uW
- Rf Chip: Indy R2000
- Air Interface Protocol: EPCglobal Gen2 ( ISO18000-6C )
- Working Frequency: 865-868 / 920-925 / 902-928 MHz ( custom-design for frequency band )
- Output Power: 5-30dBm adjustable 1dB step interval +/- 1dB precision
- Output Power Flatness: +/- 0.2dB
- Antenna Interface: 4-channel 50Ω RF connector SMA Receptacle
- Regions Supported: FCC 902-928 MHz ETSI 865.6-867.6 MHz China 920-925 MHz Others for customization（ 865-868MHz, 902-928MHz ）
- Receive Sensitivity: < -84 dBm
- Tag Rssi: Supported
- Antenna Detector: Supported
- Ambient Temp Monitor: Supported
- Working Mode: Single/DRM
Environmental
- Operating Temp: -25 ℃ to 65 ℃
- Storage Temp: -40 ℃ to 85 ℃
- Humidity: 10% – 95%
PRENOSI
Prenosi in priročnik